Programming Speed Dials

Samsung iDCS Systems

Personal Speed Dials 50 personal speed dials accessible from your telephone ONLY. – With telephone idle, and handset in cradle. – Dial Transfer 105. You see on the second line – 00: – The system is asking for a Bin Number to store your Speed Dial Number.    You have 00 – 49 as Bin Numbers Display shows: [Your Ext] SPEED DIAL 00: – Press the Third Soft Key to move cursor over into blank field.    ( Soft Keys – those small keys just below the LCD Screen) – Enter a Line access code - 9 (System needs this to dial out) – Enter telephone number up to 18 digits, including *, #. – Press Third Soft Key to store number. Phone beeps and display resets to show information entered. – Volume Up to move to next Bin Number and repeat steps 4 thru 7. – Press Redial key to enter Speed Dial Name. (Redial = 2 buttons above ANS/RLS button) – Use Volume Up / Down to specify Bin Number. – Press Third Soft Key to move cursor over to blank field. – Press the corresponding Keypad Button until desired letter appears. – Press Volume Up / Down to move cursor to next / previous position. – Press Third Soft Key to save info. Phone beeps and display resets to show information entered. – Repeat steps 10 thru 14 until happy. – Press Transfer to save and exit programming. Programming System Speed Dials 500 System Speed Dials accessible from ANY telephone. Note: This should be done by the System Administrator Only. – Press Transfer Key and dial 200 . Enter access code – 1234 . – Press Volume Up to “Enable” programming. – Press Transfer Key again to exit, and display will return to normal. – Dial Transfer 705 to assign Speed Dial Number to Bins 500 – 999. – Follow steps 4 thru 7 above to enter Speed Dial info. Accessing Speed Dials Press Memory Key , Dial Speed Dial Bin Number (00-49) or (500-999)