Surge Products

The following are a few products we use to surpress these electrical surges.

TowerMax® 8 KSU
SurgeGate Plus™ Circuitry
is a “power monitoring” system.

Protects AC equipment against prolonged over-voltages, as well as surges. In the event of a prolonged over-voltage, SurgeGate™ Circuitry will disconnect power to equipment, then automatically reconnect it once power has returned to a safe level. All eight AC Power outlets are spaced for transformers. Four Always On and four Swithched outlets provide maximum flexibility.
Expandable System Protection
with TowerMAX® Series Base Units
TowerMAX® and AllPath® modules can be attached to expand system protection as your system grows.

Co / Trunk Protection
Auto-Resetting technology
PTC resistors open when a surge occurs, protecting your equipment, but unlike other telephone protectors,
the PTCs close again once the surge passes.
Less downtime, and less service calls.

Cat 5 Data Protection
Protects 4 Pair Category 5e OSP or UTP Cable connections to Local Area Networks.
Comes with RJ-45 Jacks In & Out.
Simply use patch cords to install.
Clamping level is set at 16V.
Exceeds Category 5e Requirements per TIA568 & 758.

T1 / ISDN Protection
Protects high-speed and voice and computer networks.
Protects two Leased Lines or T1 lines.
RJ-11/45 jacks, pins 1,2,4,5 protected on each jack.
Auto-Resetting technology
PTC resistors open when a surge occurs, protecting your equipment, but unlike other telephone protectors,
the PTCs close again once the surge passes.
Less downtime, and less service calls.

25 Pair Protection

The R66P25 series of protected blocks for indoor use
provide protection, protection/demarcation,
and sneak current fuse protection.
Intended for utilization in small businesses, multiple dwelling units (MDUs), and medium-density commercial.

Pico® Protector Module
Each Pico Protector module functions as a 1-pair
bridging clip to provide both overvoltage
and “sneak current” protection on 66M blocks.
The Pico module uses very high-speed,
solid-state technology for voltage protection
and fuses for current protection.
Each module contains two replaceable 350mA fuses
and solid-state silicon components.

SuregArrest Professional

SurgeArrest's components Thermal fuses
ensure instantaneous reaction to lightning strikes
and wiring faults. If the surge components are damaged
due to power spike or over voltage,
excess power cannot reach your equipment.
Unlike APC's SurgeArrest products,
most surge suppressors continue to let power through
even after circuits have been damaged,
leaving your equipment exposed to other damaging surges.

Uninteruptable Power Supplies
A UPS provides surge suppression, line filtering
and instantaneous battery backup power to protect
mission-critical applications in the event of any power disturbance.

More Sizes to Choose From
Back UPS
Range - 300 - 650Va
Application - Office & Home PCs.
SMART UPS
Range - 420 – 1000Va
Application - Servers & Networks.
MATRIX
Range - 3000 – 5000Va
Application - Servers, Networks & Telecom Equipment.


	TowerMax® 8 KSU SurgeGate Plus™ Circuitry is a “power monitoring” system. Protects AC equipment against prolonged over-voltages, as well as surges. In the event of a prolonged over-voltage, SurgeGate™ Circuitry will disconnect power to equipment, then automatically reconnect it once power has returned to a safe level. All eight AC Power outlets are spaced for transformers. Four Always On and four Swithched outlets provide maximum flexibility. Expandable System Protection with TowerMAX® Series Base Units TowerMAX® and AllPath® modules can be attached to expand system protection as your system grows.

	Co / Trunk Protection Auto-Resetting technology PTC resistors open when a surge occurs, protecting your equipment, but unlike other telephone protectors, the PTCs close again once the surge passes. Less downtime, and less service calls.

	Cat 5 Data Protection Protects 4 Pair Category 5e OSP or UTP Cable connections to Local Area Networks. Comes with RJ-45 Jacks In & Out. Simply use patch cords to install. Clamping level is set at 16V. Exceeds Category 5e Requirements per TIA568 & 758.

	T1 / ISDN Protection Protects high-speed and voice and computer networks. Protects two Leased Lines or T1 lines. RJ-11/45 jacks, pins 1,2,4,5 protected on each jack. Auto-Resetting technology PTC resistors open when a surge occurs, protecting your equipment, but unlike other telephone protectors, the PTCs close again once the surge passes. Less downtime, and less service calls.

	25 Pair Protection The R66P25 series of protected blocks for indoor use provide protection, protection/demarcation, and sneak current fuse protection. Intended for utilization in small businesses, multiple dwelling units (MDUs), and medium-density commercial.

	Pico® Protector Module Each Pico Protector module functions as a 1-pair bridging clip to provide both overvoltage and “sneak current” protection on 66M blocks. The Pico module uses very high-speed, solid-state technology for voltage protection and fuses for current protection. Each module contains two replaceable 350mA fuses and solid-state silicon components.

	SuregArrest Professional SurgeArrest's components Thermal fuses ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike APC's SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.

	Uninteruptable Power Supplies A UPS provides surge suppression, line filtering and instantaneous battery backup power to protect mission-critical applications in the event of any power disturbance.

	More Sizes to Choose From Back UPS Range - 300 - 650Va Application - Office & Home PCs. SMART UPS Range - 420 – 1000Va Application - Servers & Networks. MATRIX Range - 3000 – 5000Va Application - Servers, Networks & Telecom Equipment.